Motor Điện 3 Pha Hộp Số - Mặt Bích
Liên hệ






Đang trực tuyến : 1
Hôm nay : 17
Hôm qua : 100
Lượt truy cập : 466.422
Trong tháng : 1.511
Trong tuần : 261
| Specifications and Ratings | |
| Category | Horizontal Type Helical Geared Motor |
| Gear Ratio | 1/5 ~ 1/200 |
| Mounting | Horizontal Foot Mout |
| Output Shaft (Ø) | 18mm ~ 60mm |
| Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization) |
| SCM4 (Nitrogen Hardening) | |
| Motor Specification and Rating | |
| Design Standard | IEC, CQC, JIS |
| Pole | 4P |
| Output Power | 0.09KW ~ 11.25KW (1/8 HP ~ 15HP) |
| Rated Frequency | 50Hz / 60Hz |
| Time Duty | S1 (Continuous Duty) |
| Stator Insulation | Class B |
| Method of Starting | Full Voltage Direct On Line or Y-Δ Starting |
| Environmental Restriction | |
| Place | Indoor. The product should be installed on flat and solid foundation |
| Voltage Regulation | ± 10% |
| Frequency Regulation | ± 5% |
| Ambient Temperature | -5℃ - 40℃ |
| Altitude | Not exceed 1000 Meters |
| Relative Humidity | Less than 85% RH (Non-Condensation) |
| Structure | |
| Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) |
| Lubrication | Grease NO.0 |
| Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. |
| Terminal Box | Larger Size Made by Pressed Steel Which can be Set 90° Apart with |
| Conduit Hole Cable Entrance at Left Side View from The Drive End. | |
| Lead Terminal | Solderless Lug Teminal |
| Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color |
| (Munsell 7.5G 4/2.) | |
| Bolt Thread | ISO Metric System |
