Motor Điện 3 Pha Hộp Số - Mặt Bích
Liên hệ
Đang trực tuyến : 1
Hôm nay : 51
Hôm qua : 124
Lượt truy cập : 415.414
Trong tháng : 3.714
Trong tuần : 0
Specifications and Ratings | |
Category | Horizontal Type Helical Geared Motor |
Gear Ratio | 1/5 ~ 1/200 |
Mounting | Horizontal Foot Mout |
Output Shaft (Ø) | 18mm ~ 60mm |
Gear Material | S45C (High-Frequency Wave), Scm21 (Carbonization) |
SCM4 (Nitrogen Hardening) | |
Motor Specification and Rating | |
Design Standard | IEC, CQC, JIS |
Pole | 4P |
Output Power | 0.09KW ~ 11.25KW (1/8 HP ~ 15HP) |
Rated Frequency | 50Hz / 60Hz |
Time Duty | S1 (Continuous Duty) |
Stator Insulation | Class B |
Method of Starting | Full Voltage Direct On Line or Y-Δ Starting |
Environmental Restriction | |
Place | Indoor. The product should be installed on flat and solid foundation |
Voltage Regulation | ± 10% |
Frequency Regulation | ± 5% |
Ambient Temperature | -5℃ - 40℃ |
Altitude | Not exceed 1000 Meters |
Relative Humidity | Less than 85% RH (Non-Condensation) |
Structure | |
Shell Material | Aluminum Alloy (Adc356), Cast lron (Fc25) |
Lubrication | Grease NO.0 |
Bearing | Grease Pre-Packed Double-Shield Rolling Bearing. |
Terminal Box | Larger Size Made by Pressed Steel Which can be Set 90° Apart with |
Conduit Hole Cable Entrance at Left Side View from The Drive End. | |
Lead Terminal | Solderless Lug Teminal |
Painting | Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color |
(Munsell 7.5G 4/2.) | |
Bolt Thread | ISO Metric System |